CHARACTERISTICS AND BENEFITS

Excellent cleaning power pH neutral: mild product Needs no rinsing. Leaves behind a pleasant clean perfume Does not damage treated material Does not create a surface film Will not affect surface appearance.

INSTRUCTIONS AND GUIDELINES

This product is applied without any specific instructions or guidelines.

EQUIPMENT CLEANING

At the end of the application, the equipment used can be washed using water.

SAFETY

When applying the product, always use suitable personal protective equipment and follow the instructions on the product safety data sheet with care.

PHYSICAL AND TECHNICAL INFORMATION

Aspect: Transparent liquid

Colour: Green

Odour: Typical

pH: 6,0 / 7,0

STORAGE

Keep the container tightly closed and store in a cool, dry place.

SHELF LIFE

24 months in the original, sealed packaging, stored in a cool, dry place.

PACKAGING

1 l bottles – 12 bottles per box – 5 l cans – 4 cans per box – 10 l cans – loose cans

This product can be used on both indoor and outdoor surfaces. Suitable for use on: Cement marble agglomerate, Marble resin agglomerate, Quartz-resin agglomerate, Molten basalt, Craquelé ceramics, Glazed ceramics, Clinker, Granite, Lapped porcelain stoneware, Polished porcelain stoneware, Natural porcelain stoneware, Textured porcelain stoneware, Limestone, Marble, and Travertine.

900-1100 m2/l

Cloth, mop, single disc machine, hard floor cleaner

Preparing and cleaning the surface

1. Before proceeding to wash the surface with Algafloor, it is advisable to clean away any surface residues, such as dust, debris and coarse dirt, using a broom or a vacuum cleaner,

Application

2. The product must be diluted in clean water:

10-20 grams in 5 litres water (2-3 capsful of product in a bucket of water), if used on porcelain stoneware, ceramics, and quartz agglomerate

30-40 grams in 5 litres water (4-5 capsful of product in a bucket of water), if used on natural stone with a polished finish

After diluting the product with water according to the proportions listed above, proceed to wash the surface using a preferred method. Wash the floor covering or the area concerned, distributing a fine layer of the prepared solution, scrubbing harder in the case of more stubborn dirt.

If used in the dilution ratios stated above, the floor will not require rinsing and it can be opened to foot traffic as soon as it is dry.

CLICK HERE