CHARACTERISTICS AND BENEFITS

•  It has pronounced stain-proof properties
•  Provides water-repellency to the surface
•  Provides oleo-repellency to the surface
•  Fast drying
•  Protects material against dirt and staining
•  Adds a high degree of water repellence
•  Resistant to UV rays
•  Will not yellow over time
•  Resistant to the elements
•  Slightly increases resistance to dirt

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Cotto, Terracotta, Concrete, Sandstone, Tuff, Quarzites, Porphyry

10/15 m2/l

Brush, Lambswool applicator, Roller, Cloth

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply ATS 60 to wet or damp surfaces.

4. Apply ATS 60 to surfaces with a temperature of between +5 and +40°C

5. Any adjacent surfaces not being treated with the product must be protected.

Product dilution

The product is applied pure or diluted accordin to the type of surface where is applied

Use the product pure if applied on high absorbent materials with a porous and rough surface
such as hand-made terracotta, outdoor concrete pavers

Use the product with 1:1 or 1:2 dilution if applied on absorbent materials with a compact and
regular surface such as industrial cotto or cementine

Application 

6. Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making
sure to create an even layer to cover the whole surface being treated

7. The product is fast drying and usually does not create residues. When applied to a compact
surface that is not very absorbent, it could leave slight residues on the surface that can be easily
wiped off with a clean, dry cloth. In case of very absorbent surfaces, we recommend applying a
second coat of product, no less than 45 minutes after the first.

Drying time

The product is fast drying and in any case, within 45 minutes from application.

Opening to floor traffic

The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

Complementary Cleaning and Maintenace Products

– For routine cleaning of a surface treated with ATS 60, we recommend: NEUGEL or ALGAFLOOR

– For extraordinary cleaning of a surface treated with ATS 60, we recommend: FABER 30 or
DETERFUG, according to the type of stone to be cleaned

– For de-waxing a surface treated with AS 930, we recommend: DEC 21 and/or DECERA P