CHARACTERISTICS AND BENEFITS

•  It has pronounced stain-proof properties
•  Low odour solution
•  Fast drying
•  Protects material against dirt and staining
•  Adds a high degree of water repellence
•  Resistant to UV rays
•  Will not yellow over time
•  Resistant to the elements
•  Certified for food use
•  Ideal as pre-grouting treatment

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Ceramic, Craquelé ceramic, Polished porcelain stoneware, Natural porcelain
stoneware, and Clinker

10/15 m2/l

Brush, Lambswool applicator, Roller, Cloth, Production Line

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply GRESLUX to wet or damp surfaces.

3. Apply GRESLUX to surfaces with a temperature of between +5 and +40°C

4. Any adjacent surfaces not being treated with the product must be protected

Application 

6a. Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making
sure to create an even layer to cover the whole surface being treated

7a. 10-15 minutes after application, proceed to re-distribute the product residues on the
surface, using a clean, dry cloth. Even out the residues until they are completely removed. This
operation is much faster and simpler if carried out with a floor polisher, fitted with white pad or
a clean cloth (cotton, wool-cotton, lambswool)

Drying time

The product is fast drying and in any case, dries within an hour of application

Opening to floor traffic

The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

Production line application

The product can be applied using special equipment as part of an industrial
production/treatment line. Based on the characteristics of the line available, the product will
generally require an application stage using a sprinkler, silicone roller or other suitable means;
this must be followed by the removal of residues, to be carried out with special brushes or pads.

For more information about how to use the GRES LUX line or for other specific solutions for
industrial use, please contact our Technical Division.

Complementary Cleaning and Maintenace Products

– For routine cleaning of a surface treated with GRESLUX, we recommend: ALGAFLOOR

– For routine cleaning of a surface treated with GRESLUX, we recommend: FABER 30 or
DETERFUG, according to the type of stone to be cleaned