CHARACTERISTICS AND BENEFITS

•  Brings out the shine on treated materials
•  Increases surface hardness of the support
•  Makes the subsequent daily cleaning operations much simpler
•  Quick and easy application
•  Can also be used on surfaces treated with other waxes
•  Ideal for polishing walls, vertical surfaces or horizontal surfaces not subjected to foot
  traffic

Product suitable for indoor use.

Suitable for use on: Granite, Marble, Limestone, Travertine

20/30 m2/l for first-time application.

30/50 m2/l for maintenance.

Product application:

Brush, Lambswool applicator, Roller, Cloth, Spray

Product polishing

Mechanical, orbital or flexible polisher

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply B1 920 to wet or damp surfaces.

3. Apply B1 920 to surfaces with a temperature of between +5 and +40°C

4. Any adjacent surfaces not being treated with the product must be protected.

5. We recommend working on small areas in order to polish them easily with the orbital or
flexible polisher.

6. Before proceeding with to apply the product, we recommend pouring B1 920 into a spray
applicator bottle with a wide nozzle. This serves to apply the product to the surface, notably
speeding up the work process.

Application 

7. Shake the bottle thoroughly and spray a small amount of product directly onto the area to be
treated. Generally, about 2-3 sprays of product are enough for treating small sections of an area.

8. As soon as the product has been applied, proceed to polish the surface. This operation can be
carried out manually on small surfaces, using a wool-cotton cloth, white or wire wool pad. In
case of larger areas, we recommend using a tool such as the orbital or flexible polisher,
complete with white or lambskin pad, or wire wool or similar.

Pass the polisher being sure to use concentric movements so as to distribute the product evenly
over the whole section being treated.

9. Work the surface, brushing or polishing until all excess has been removed (the Spray Buffing
technique)and the end result is both even and polished.

10. Pass on to the next section, repeating the polishing treatment process as described above.

11. After treating all of the surface areas, remove any steel wool residues from the surface using
a dry cloth (Dry mop)

Drying time

After the product is completely dry, no further waiting time is necessary.

Opening to floor traffic

The product is not for use on areas subject to foot traffic.

Complementary Cleaning and Maintenace Products

– For de-waxing a surface treated with B1 920, we recommend: DEC 21 and/or DECERA P