Select Page

LOOKING FOR

A PROFESSIONAL ADVICE?

FABER SCRATCH OFF KIT

Polished porcelain ceramic tile is a very resistant material, but scratches may occour. This could happen during slabs handling or after installation operations, but even the daily use of the surface may cause abrasions.

 

Thanks to Faber SCRATCH OFF KIT today it is possible to restore scratches and abrasions from polished porcelain ceramic tiles, in a fast, simple and clean way.

 

KIT CONTENT

 

• 1x SCRATCH OFF CLEANER – 500 ml: Concentrated product to clean the surface before the restoration treatment.

• 1x SCRATCH OFF LIGHT – 250 ml: Restoration treatment for light coloured surfaces.

• 1x SCRATCH OFF DARK – 250 ml: Restoration treatment for dark coloured surfaces.

• 2x FAB K: Specific pad to apply SCRATCH OFF LIGHT or SCRATCH OFF DARK treatments.

• 1x WHITE PAD: Tool to be used for preliminary and final cleaning of the surface.

Agglomerate cement-marble

Concrete Porcelain gres Natural or Structured
Agglomerate resin-marble  Cotto Porphyry
Agglomerate resin-quartz Granite Quartzite
Basaltina – Lava Stone Limestone Sandstone
Brick facings Marble Slate
Cement tile Molted basalt Terracotta
 Ceramic Glazed Porcelain gres Honed Travertine
 Clinker Porcelain gres Lappato Tuff

CHARACTERISTICS AND BENEFITS

  •  Effective against different kind of dirt
  •  Ideal solution to remove foot-traffic dirt
  •  Delicate on surface but strong against dirt
  •  Suitable to remove gresy dirt on kitchen or bathroom countertops

Suitable for: outdoor or indoor application

Suitable for: polished porcelain ceramic tile (full body polished or glazed polished)

10-15 m2/l

Cloth, Sponge, White Pad

Preparing and cleaning the surface

1. Before proceeding to wash the surface with SCRATCH OFF CLEANER, it is advisable to clean
away any surface residues, such as dust, debris and coarse dirt, using a broom or a vacuum
cleaner,

Application 

2. The product can be used undiluted or it can be diluted in clean water, according to the
amount of dirt that needs to be removed:

– If used as strong degreasing cleaner to remove foot-traffic dirt, stubborn and aged dirt
the product should be diluted to 20-30% in water (1 part of product in 2/4 parts of
water)
– If used as simple cleaning products to clean a ceramic slab before the restoration the
product should be diluted to 10% in water (1 part of prduct in 9 parts of water)

Before apply the product on the whole surface make a preliminary test on a small portion of the
surface.

3. Apply the product in the selected dilution ratio to the surface, covering the whole area being
cleaned and distributing it evenly and vigorously with a white pad.

4. Leave the product to work for about 10-15 minutes, helping its dissolving action by passing
over with white pad at more or less regular time intervals, according to the difficulty in
removing the residues that need to be dissolved. This will boost the dissolving action of the
product and give you better results.

5. Remove the residues and rinse well with clean water. If the result is not completely
satisfying, repeat the operation, following the steps above. After the preliminary test, if the
surface shows resistance, the product can be used pure and with loger contact times.

FAQ

Frequently Asked Questions

How to restore the marble ?

how to polish marble countertops ?

where can i get the best marble polishing kit ?

how to remove the stain from white marble ?

WHAT ARE INORGANIC STAINS?

WHAT ARE THE TYPES OF STAINS?

WHY DOES MY MABLE FLOOR SOUNDS HOLLOW?

HOW DO YOU PROTECT WHITE MARBLE FROM STAIN?

how to remove the stain from marble ?

How to make marble shine at home ?

what is best polishing for marble countertops ?

can a cracked marble be fixed ?

WHAT ARE ORGANIC STAINS?

ARE MARBLE FLOOR HIGH MAINTENANCE

HOW DO YOU FIX A HOLLOW MARBLE FLOOR?

DOES MARBLE STAIN WITH WATER?

Get In Touch vysakh

Marble Corner Trdg LLC

Industrial Areas - 15

Sharjah

 

 

M: 050 163 8038

E: hello@marblecorner.me