CHARACTERISTICS AND BENEFITS

•  High resistance
•  Long-lasting performances

Marble, Granite and natural stones.

N.A.

Spatula, Brush, Roll

Application 

Test on a small area before proceeding, so to ensure product suitability and final result.

The surfaces that need to be treated must be degreased and treated mechanically and/or
chemically before the application of GL 34 A+B.

Scrupulously respect the mixing ratio: every change in this ratio could irreparably compromise
the final performances of the hardened product. Carefully mix the two component with regular
movement, avoiding excessive turbulence that could cause air bubbles inside the mixture.
When the product is ready, apply to the interested surface by using a spatula or a brush. Then
remove the product in excess and wait for the product hardening.

Hardening

Even if the stone slab could be moved after the handling time (6-8 hours at 25°C), the product
reaches the maximum of its performances only after the complete hardening (8-10 days). If the
system get hardened by oven, its performances get immediately the maximum level. The ideal
solution should be to dry the surface by using hot air. This method ensures the best of the
product performances and faster production cycles.

Mechanical grinding/polishing

After 24 hours from the system application, the surface can be mechanically grinded and
polished.