LOOKING FOR
A PROFESSIONAL ADVICE?
FABER ABR 600
- Description
- Materials
- Characteristics & Benefits
- Uses
- Coverage
- Application Equipment
- Application Steps
- Download
ABR 600 is a dense, creamy solution that contains specific abrasives for the restoration of surfaces in general. A multifunctional product can be used on various materials thanks to its honing micro-abrasive action. When used on calcium-based materials, the product removes imperfections and abrasions leaving a uniform soft “matt” finish. On porcelain and ceramic tiles, it removes general imperfections and deep scratches without altering the original surface gloss. The product can be used in conjunction with K100 on acid-sensitive materials to simplify the restoration of the surface, whenever K100 can’t achieve the desired look on its own.
ABR 600 is recommended for all those situations where surface shine needs to be reduced, without having to intervene using aggressive acid-based products or mechanical processes.
Agglomerate cement-marble |
Concrete | Porcelain gres Natural or Structured |
Agglomerate resin-marble | Cotto | Porphyry |
Agglomerate resin-quartz | Granite | Quartzite |
Basaltina – Lava Stone | Limestone | Sandstone |
Brick facings | Marble | Slate |
Cement tile | Molted basalt | Terracotta |
Ceramic Glazed | Porcelain gres Honed | Travertine |
Clinker | Porcelain gres Lappato | Tuff |
CHARACTERISTICS AND BENEFITS
- Versatile product suited to different applications
- Based on the use of micro-abrasive polishing particles.
- Simple and effective application
- Ideal for surfaces that are not perfectly laid or levelled.
- Water-based product
- Even finish
This product can be used on both indoor and outdoor surfaces.
This product is suitable for use on: marble, granite, travertine, limestone, glazed ceramics,
natural porcelain stoneware, polished porcelain stoneware, lapped porcelain stoneware,
textured porcelain stoneware, marble-cement agglomerate, marble-resin agglomerate, and
quartz-resin agglomerate.
30/40 m2/kg
Single disc machine with at least 1.5 HP; manual rotary brush.
Faber Chimica is able to supply the WARRIOR single disc machine, which has a power of 2.2 HP,
and is optimised for the correct application of any product.
Preparing and cleaning the surface
1. Carefully clean the surface, making sure to remove any dust or dirt present.
2. The product can be applied across the whole area to be treated. To make treatment easier,
however, we recommend in any case that sections of 2 m2 are treated at a time
3. Never apply ABR600 to wet surfaces. ABR600 can be used on slightly damp surfaces;
therefore, please ensure that the surface to be treated is as dry as possible.
4. Apply ABR600 to surfaces with a temperature of between +5 and +40°C
5. Any adjacent surfaces not being treated with the product must be protected.
Application
6. Shake the bottle well before used and pour 2/3 spoons of product onto the surface to be
treated. This amount is sufficient to treat a surface area of about 2 m2.
7. Add a small amount of water to the cream. As a rough guide, each spoonful of product
requires around 1 spoon of water.
8. As soon as the water has been added to the cream, proceed to apply it to the surface using
the single disc machine, fitted with white pad and set to between 150 and 200 r.p.m. Continue
with the single disc machine, taking care to cover the whole surface area evenly with the cream.
Try to pass over each section of floor the same number of times.
9. During the application process, the mix must maintain its creamy consistency and therefore,
if it should become too dry, gradually add a little water.
10. Continue to pass over the surface with the polisher until the result is as required. This is
easy to check during application by removing a small area of product using a squeegee mop or
similar, and checking the surface finish.
11. Once the required result has been achieved, vacuum or remove any residues from the
surface and rinse with plenty of clean water.
Generally, ABR600 will achieve the desired result within 15-25 passages of the polisher,
independently of the type of surface.
Drying time
12. After carefully removing any residues and rinsing the surface with water, no further waiting
time is necessary.
Opening to floor traffic
13. After carefully removing any residues and rinsing the surface with water, the floor can be
opened for use.
Complementary Cleaning and Maintenace Products
– For routine cleaning of a surface treated with ABR600, we recommend: NEUGEL or
ALGAFLOOR
– For extraordinary cleaning of a surface treated with ABR600, we recommend: FABER 30 or
DETERFUG, according to the type of dirt and the material to be cleaned.
FAQ
Frequently Asked Questions
How to restore the marble ?
how to polish marble countertops ?
where can i get the best marble polishing kit ?
how to remove the stain from white marble ?
WHAT ARE INORGANIC STAINS?
WHAT ARE THE TYPES OF STAINS?
WHY DOES MY MABLE FLOOR SOUNDS HOLLOW?
HOW DO YOU PROTECT WHITE MARBLE FROM STAIN?
how to remove the stain from marble ?
How to make marble shine at home ?
what is best polishing for marble countertops ?
can a cracked marble be fixed ?
WHAT ARE ORGANIC STAINS?
ARE MARBLE FLOOR HIGH MAINTENANCE
HOW DO YOU FIX A HOLLOW MARBLE FLOOR?
DOES MARBLE STAIN WITH WATER?
Get In Touch vysakh
Marble Corner Trdg LLC
Industrial Areas - 15
Sharjah
M: 050 163 8038
E: hello@marblecorner.me