CHARACTERISTICS AND BENEFITS

•  Specifically for materials that suffer from colour changes.
•  It has pronounced stain-proof properties
•  Provides hydro-repellency to the surface
•  Provides oleo-repellency to the surface
•  Extremely fast drying
•  Will not change the colour of the material
•  Protects material against dirt and staining
•  Adds a high degree of water repellence
•  Resistant to UV rays
•  Will not yellow over time
•  Resistant to the elements

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Marble, Sandstone, Limestone, Granite, Slate, Basaltina, Quartzite,
Porphyry, Travertine, Cotto, Terracotta, Marble-cement agglomerate, Marble-resin agglomerate,
Quartz-resin agglomerate.

10/15 m2/l

Brush, Lambswool applicator, Roller, Cloth

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply B1 700 to wet or damp surfaces.

3. Apply B1 700 to surfaces with a temperature of between +5 and +40°C

4. Any adjacent surfaces not being treated with the product must be protected.

Application 

5. Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making
sure to create an even layer to cover the whole surface being treated

6. The product is extremely fast drying and leaves no particular residues. If there are any slight
residues on the surface, these can be easily wiped off with a clean, dry cloth. In case of very
absorbent surfaces, we recommend applying a second coat of product, to be applied no less
than 30 minutes after the first

Drying time

The product is very fast drying and in any case, dries within 30 minutes from application.

Opening to floor traffic

The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

Complementary Cleaning and Maintenace Products

– For routine cleaning of a surface treated with B1 700, we recommend: NEUGEL or ALGAFLOOR

– For extraordinary cleaning of a surface treated with B1 700, we recommend: FABER 30 or
DETERFUG, according to the type of stone to be cleaned