CHARACTERISTICS AND BENEFITS

•  High penetration even on the most compact materials
•  High penetration even on materials with salt/efflorescence presence
•  Excellent anti-rising features
•  Resistant to UV rays
•  Will not yellow over time
•  Does not create film
•  Breathable

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: natural stones, marble, limestone, travertine, granite, agglomerates,

10/15 m2/l (depending on the absorption capacity of the surface to treat)

Brush, Lambswool applicator, Roller, Cloth

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply the product to wet or damp surfaces

3. Apply DPS to surfaces with a temperature of between +5 and +40°C

4. Any adjacent surfaces not being treated with the product must be protected.

Application 

5. Apply an even, abundant coat of product to a clean, dry surface with the preferred tool,
making sure to create an even layer to cover the whole surface being treated. In case of very
absorbent material is possible to apply a second coat of product, “wet on wet”. In this case
apply the second coat “crossing” the application of the first coat.

6. After the application of the last coat of product wait about 10-15 minutes for the product
penetration and then, if present, remove the residues of product by using a clean cloth.

7. The product usually does not create residues. When applied to a compact surface that is not
very absorbent, it could leave slight residues on the surface that can be easily wiped off with a
clean, dry cloth or by using a single disc machine equipped with a soft white pad.

Drying time

The product is fast drying and in any case, within 1 hour from application.

Opening to floor traffic

The surface can be opened to floor traffic about 4 hours after the product has been applied.

Complementary Cleaning and Maintenace Products

– For routine cleaning of a surface treated with DPS, we recommend: NEUGEL or ALGAFLOOR

– For extraordinary cleaning of a surface treated with DPS, we recommend: FABER 30 or
DETERFUG, according to the type of stone to be cleaned