CHARACTERISTICS AND BENEFITS

•  Low odour solution
•  Fast drying
•  Adds a high degree of water repellence
•  Resistant to UV rays
•  Does not film
•  Does not change the appearance of the surface
•  Will not yellow over time
•  Resistant to the elements
•  Protects the material against the action of moisture

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Marble-cement agglomerate, Slate, Sandstone, Basaltina – Lava stone,
Molten basalt, Cementine, Concrete, Craquelé ceramics, Glazed ceramics, Clinker, Cotto,
Granite, Lapped porcelain stoneware, Polished porcelain stoneware, Natural porcelain
stoneware, Textured porcelain stoneware, Limestone, Marble, Exposed brickwork,
Reconstituted stone (Eco stone), Porphyry, Quarzite, Terracotta, Travertine

8/15 m2/l

Brush, Lambswool applicator, Roller, Cloth

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply DREP to wet or damp surfaces.

3. Apply DREP to surfaces with a temperature of between +5 and +40°C

4. Any adjacent surfaces not being treated with the product must be protected.

Application 

5. Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making
sure to create an even layer to cover the whole surface being treated

6. About 5-10 minutes after application, and in any case, before the product is completely
absorbed, as in cases of more absorbent surfaces, proceed to re-distribute the excess product
using the same tool used for application, taking care to achieve even coverage at the end of
treatment.

7. The product may leave slight surface residues, in cases where it is applied to polished or
brushed surfaces, or on more compact, less absorbent materials. To remove these residues,
about 10-15 minutes after application, rub the surface with a clean, dry cloth.

Drying time

The product is fast drying and in any case, dries within 60 minutes from application.

Opening to floor traffic

The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

Complementary Cleaning and Maintenace Products

– For routine cleaning of a surface treated with DREP, we recommend: NEUGEL or ALGAFLOOR

– For routine cleaning of a surface treated with DREP, we recommend: FABER 30 or DETERFUG,
according to the type of stone to be cleaned

– For DE-WAXING a surface treated with DREP, we recommend: DEC 21 and/or DECERA P