CHARACTERISTICS AND BENEFITS

•  Excellent grip
•  Resistant to stains

For indoor or outdoor use on marble, granite and natural stones.

10/15 m2/lt

Spatula, Brush, Roll

Application 

Test on a small area before proceeding, so to ensure product suitability and final result.
Always make preliminary tests to evaluate the colour change.
Mix the two components carefully according to the recommended ratio. Variations in this ratio
may compromise hardening and final properties of the product. Apply the product well mixed
to an untreated surface, clean and dry and by temperatures not less than 10 °C.

Apply the product on a floor honed with 50 and 200 grit using a spatula, a brush or a roll being
careful to apply a uniform coat of product to the whole of the area. Allow hardening for 15
hours at least before proceeding to the final phase of honing with grits 400 and 800 before
polishing with powder.

The product enhances the colour of material and heightens the waterproof oil-repellent
performances. For small isolated creeks, apply the product to the creek, wait for hardening and
remove manually the excess up to a complete re-polishing of the area.