CHARACTERISTICS AND BENEFITS

•  Protects material against dirt and staining
•  Adds a high degree of hydro-oleo repellency to the surface
•  Resistant to UV rays
•  Will not yellow over time
•  Resistant to the elements
•  Certified for food use

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Marble, Sandstone, Granite, Limestone, Slate, Basaltina, Quarzite, Porphyry,
Travertine, Cotto, Terracotta, Marble-cement agglomerate, Marble-resin agglomerate, Quartzresin agglomerate

10/15 m2/l

Brush, Lambswool applicator, Roller, Cloth

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply the product to wet or damp surfaces

3. Apply PROTEX to surfaces with a temperature of between +5 and +40°C

4. Any adjacent surfaces not being treated with the product must be protected.

Application 

5. Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making
sure to create an even layer to cover the whole surface being treated

6. The product is fast drying and usually does not create residues. When applied to a compact
surface that is not very absorbent, it could leave slight residues on the surface that can be easily
wiped off with a clean, dry cloth. In case of very absorbent surfaces, we recommend applying a
second coat of product, no less than 45 minutes after the first.

Drying time

The product is fast drying and in any case, within 45 minutes from application.

Opening to floor traffic

The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

Complementary Cleaning and Maintenace Products

– For routine cleaning of a surface treated with PROTEX, we recommend: NEUGEL or
ALGAFLOOR

– For extraordinary cleaning of a surface treated with PROTEX, we recommend: FABER 30 or
DETERFUG, according to the type of stone to be cleaned