CHARACTERISTICS AND BENEFITS

•  Sharp brightness
•  High hardness
•  Resistance to foot traffic
•  Fast result
•  Closure against soiling agents

For interiors and exteriors: polished or lappato (glazed polished) porcelain stoneware, polished
or finely honed granites

40/50 m2/kg

Single disc machine, which has a power of 2 HP (2.2 HP is preferable); Manual rotary brush.

Faber Chimica is able to supply the WARRIOR Single disc machine, which has a power of 2.2 HP,
and is optimised for the correct application of any product.

Preparing and cleaning the surface

1. Carefully clean the surface, making sure to remove any dust or dirt present.

2. Never apply ATS 60 to wet or damp surfaces.

4. Apply ATS 60 to surfaces with a temperature of between +5 and +40°C

5. Any adjacent surfaces not being treated with the product must be protected.

Application 

Test on a small area before proceeding, so to ensure product suitability and final result.

The product appears as a solid, but it can be melt by agitation. Use STAR SHINE EASY undiluted,
proceeding by small surface portions of about 1 sq.mt. each.

Apply the quantity recommended here below to the area to be treated and work by concentric
movements with a floor machine and white pad. Work until the product will be dry, prolonging
the movement with the floor machine to remove any possible residue.

Repeat the application in order to achieve a higher brightness degree orsuperficial closure. The product does not give any superposition defects; therefore once achieved the maximum of brightness, no difference will be remarkable between two areas polished separately. After polishing the surface, rinse well with water and vacuum up the superficial residues.